Dual Spray Pool Fountain with Adjustable 360° PVC Spray Tubes

Double the Spray, One Simple Connection

Designed for backyard pools, this fountain uses a dual spray layout that divides water into two separate streams through a single return fitting. The PVC body includes two outlet tubes mounted to a central connection that works with compatible inground and above ground pool systems. Adapters fit 1.5 in return jets as well as 1.5 in and 1.25 in inlet and outlet fittings. Unlike floating fountains or powered water features, this unit operates directly from the existing pool pump without an additional electrical cord.

Point the Water Where You Want It

Water enters through the pool return connection before splitting into two spray outlets for a twin fountain display. Both spray tubes rotate a full 360° so the streams can cross, run side by side, or be directed toward different sections of the pool. A lower side valve adjusts the amount of water flowing through the fountain, allowing changes to spray height and water distribution. Spray height can reach up to 14 ft, depending on the connected pool pump. The fountain is recommended for systems with at least a 0.2 hp pump, while larger pumps can produce taller spray patterns within their operating capacity.

Ready Between Pool Seasons

Installation begins by selecting the correct adapter for the pool return fitting before attaching the fountain body. Once connected, the spray tubes can be rotated and adjusted without removing the unit from the return line. The PVC construction rinses clean with water after regular pool use and can be detached using the same fitting when the swimming season ends. When not in use, the fountain stores as a single assembled unit without requiring a separate power accessory.

Product Benefits

• Dual Spray Layout: Splits return water into two adjustable fountain streams.
• Wide Pool Compatibility: Fits 1.5 in and 1.25 in compatible pool return fittings.
• 360° Adjustable Tubes: Rotating spray arms allow different fountain directions and layouts.
• Pump Powered Operation: Connects directly to the existing pool pump without a separate electrical cord.
• Flow Control Valve: Side valve adjusts water flow through both spray outlets.

Specifications

• Material: Polyvinyl chloride (PVC)
• Power Source: Pool pump return line
• Tube Adjustment: 360° rotation
• Spray Height: Up to 14 ft
• Pump Requirement: Minimum 0.2 hp
• Compatible Pumps: 0.75 hp sand pump; 80 W filter pump
• Compatible Fittings: 1.5 in (inground); 1.5 in & 1.25 in (above ground)